Fiber Optic Coupling System ( Manual ) FST-SYS-6W

光纤耦合系统 ( 手动 ) 在光通信行业中的应用非常广泛，设计和开发的手动光纤耦合系统，调整精度高、稳定性好、使用方便；采用模块化设计，非常容易扩展和配套使用；可以根据客户的要求进行系统定制。

Six degrees of freedom manual precision adjustment of the fiber optic array is possible;
The loading and unloading of the device is done manually;
A viewing system is provided above and behind the device to facilitate manual alignment operations;
An infrared observation system is provided at the output of the optical waveguide to improve the reliability of alignment;
Dispensing and UV curing of devices is possible.

System name	Trimmer rack name	axle	movement	minimum resolution
Manual Fiber Optic Coupling System (FST-SYS-6W)	Six-dimensional manual adjustment frame (left and right)	X,Y,Z	±6.5mm	1μm
Manual Fiber Optic Coupling System (FST-SYS-6W)	Six-dimensional manual adjustment frame (left and right)	θx,θY,θz	±2.5°	29"/g
Manual Fiber Optic Coupling System (FST-SYS-6W)	Upper Switching Trim Rack	Z	±8°	20"/grid

name (of a thing)	Quantity and description
Long stroke guideway	1
Dovetail Slide	Seven.
Lamp holder	1 left and 1 right
lamp base	2
Aluminum gantry and connectors	1 set
6-Dimensional Adjustment Frame	2 (one left, one right)
CCD	2
camera shot (in a movie etc)	2 (one in front and one behind)
LED light source	2 (with power supply)
splitter	1 (with power supply)
45° Reflector	1 piece
BNC Data Cable	2
VGA splitter cable	1 root
FA Fixture	2 (one left, one right)
Chip Fixture	1
19-inch monitor	1 unit
Optical Breadboard	1 piece (600mmx450mmx50mm)