Product Model
product code | model number | Camera Sensor Format | Sensing Area, H x V (mm) | Beam diameter, 1/e2 (mm) |
33-156 | Lasercam-HRII 1/2-inch: 1282868 | 1/2″ | 5.9 x 4.8 | Recommended: 0.15mm min, 4.0mm max |
33-157 | Lasercam-HRII 2/3-inch: 1282870 | 2/3″ | 8.3 x 6.6 | Recommended: 0.20mm min, 6.0mm max |
General specifications
Bracket. | C-Mount | Spectral range. | 300 - 1100nm (400 - 1100nm with LDFP) |
Operating temperature (°C). | -20 to 60 | Dimensional accuracy. | ±1% (typical), ±5% max (over entire spectral and dimensional range) |
Dimensions (mm). | 68.1 x 79.3 x 40.9 (with LDFP) | Pulse Trigger. | TTL, rising or falling edge |
Weight (g). | 110 (without cable) | Peak Intensity. | Recommended: 75-95% of camera saturation |
Signal-to-noise ratio (dB). | >60 | Damage Threshold, By Design. | 32 mJ/cm2 @ 1.06μm without Low Distortion Faceplate |
Gain (dB). | Gain is factory set for optimum linear dynamic range, not user adjustable | Frame Rate. | 27Hz (Live Mode), 10Hz (with calculations) |
Gamma. | 1 | Exposure Control Trigger. | Fixed at 10ms |
Operating System : | Windows® | ||
Peak Noise (nW/cm2). | 24 (at 632.8nm) |
particulars
Coherent® Lasercam™ beam analyzer with high signal-to-noise ratio and good linear response. The new BeamView™ 4.4 interface software allows TCP/IP and NI LabVIEW&trade control. The library kit makes it easy to use in a variety of applications. The analysis functions come with examples to demonstrate the captured beam image including: beam center position, beam peak intensity position, beam divergence, ellipticity, beam intensity uniformity, Gaussian fitting, different beam diameters/widths based on user-selected percentage of peak/total energy, etc.